This supplier page is designed for buyers who already know they need Inconel 718 in bar or rod form and want to confirm available specifications, size information, heat treatment condition, inspection requirements and RFQ details.
Inconel 718 Bar Specifications
| Material | Inconel 718 bar, Alloy 718 bar, UNS N07718, W.Nr. 2.4668 |
|---|---|
| Product Forms | Round bar, rod, forged bar, billet, cut bar, machined blank, custom cut-to-length pieces |
| Typical Standards | ASTM B637, AMS 5662, AMS 5663, AMS 5664, ASME SB-637, customer drawing or project specification |
| Condition | Solution annealed, precipitation hardened / age hardened, as-forged, hot rolled, cold drawn or project-specific condition |
| Inspection | EN 10204 3.1 MTC, PMI, ultrasonic testing, tensile test, hardness, chemical analysis, third-party inspection |
| Processing | Saw cutting, custom length, machining allowance, chamfering, marking, export packing |
AMS 5662 vs AMS 5663 vs AMS 5664
Many Inconel 718 bar inquiries are driven by AMS requirements. Please confirm the exact AMS standard, revision, heat treatment condition and mechanical property requirements before ordering, because the same UNS N07718 material can be supplied in different conditions.
| Specification | Typical Material Condition | Common Use | RFQ Notes |
|---|---|---|---|
| AMS 5662 | Solution treated / annealed condition | Bar, forging stock and material requiring further heat treatment or machining | Confirm whether final aging will be done by buyer or supplier. |
| AMS 5663 | Solution treated and aged condition | High-strength aerospace bar, fastener stock and machined components | Confirm tensile properties, hardness and test report requirements. |
| AMS 5664 | High-strength aged condition depending on project requirement | Applications requiring specific high-strength mechanical properties | Send the drawing or mechanical property table with the RFQ. |
Inconel 718 Bar Procurement Checklist
For a faster and more accurate quotation, include the core purchasing details in the first email. This helps our team check availability, suitable processing route, inspection cost and delivery time.
Material Requirement
- Inconel 718 / Alloy 718 / UNS N07718
- ASTM B637, AMS 5662, AMS 5663, AMS 5664 or project standard
- Required heat treatment condition and mechanical properties
Bar Size and Quantity
- Diameter, length and quantity
- Round bar, forged bar, billet or machined blank
- Tolerance, surface finish and cutting requirement
Inspection and Delivery
- EN 10204 3.1 MTC, PMI, UT, tensile or hardness test
- Destination country and required lead time
- Drawing, marking, packing and third-party inspection needs
Why Buy Inconel 718 Bar from J&A Alloy
Supplier Support
J&A Alloy can quote standard and custom Inconel 718 bar requirements for aerospace, oil & gas, turbine, fastener, shaft and high-temperature industrial applications.
Inspection Options
Available quotation options include MTC, PMI, ultrasonic testing, tensile test, hardness, chemical analysis and third-party inspection depending on project requirements.
Processing and Alternatives
We can quote cut-to-length bar, forged bar, billet and machined blank requirements, and help compare alternatives such as Inconel X-750, Incoloy A286 and Inconel 625.
Available Bar Types and RFQ Notes
Round Bar / Rod
For shafts, fasteners, bolts, high-strength components and machined parts.
- Confirm diameter and length
- Specify heat treatment condition
- Include tolerance and surface requirements
Forged Bar / Billet
For heavy-duty aerospace, turbine, oil & gas and pressure-related parts.
- Send drawing or final part size
- Confirm forging ratio and UT
- Specify mechanical property requirements
Cut Bar / Machined Blank
For buyers who need short pieces, custom lengths or blanks for CNC machining.
- Confirm quantity and cut length
- Allow machining allowance
- Request marking and packing needs
Common Applications for Inconel 718 Bar
| Application | Why Inconel 718 Bar Is Used | Procurement Notes |
|---|---|---|
| Aerospace fasteners and structural hardware | High strength after aging, good fatigue resistance and strong specification control. | Confirm AMS specification, heat treatment and traceability. |
| Turbine and hot-section components | Strength retention, creep resistance and oxidation resistance at elevated temperature. | Confirm working temperature, stress level and inspection. |
| Oil & gas and sour service parts | High strength combined with nickel alloy corrosion resistance. | Confirm NACE/project requirements, hardness and condition. |
| Shafts, bolts, rings and machined parts | Useful where high strength and dimensional stability are required. | Send drawing, final dimensions and machining allowance. |
| Cryogenic and pressure equipment components | Good mechanical properties across demanding temperature ranges. | Confirm applicable ASME/ASTM requirements and tests. |
Heat Treatment and Material Condition
Inconel 718 bar properties depend strongly on heat treatment. Buyers should specify whether the bar is required in solution annealed, aged, precipitation-hardened, as-forged or custom condition. If your drawing only gives mechanical properties, send the target tensile strength, yield strength, elongation, hardness and test standard so our team can quote a practical condition.
| Condition | Typical Use | What to Confirm |
|---|---|---|
| Solution annealed | Further forming, machining or project-specific aging | Annealing standard, grain size or later heat treatment plan. |
| Age hardened / precipitation hardened | High-strength finished components, fasteners and shafts | AMS/ASTM condition, tensile properties, hardness and test report. |
| Forged / rough machined blank | Large components, rings, billets and custom machined parts | Drawing, forging ratio, UT, heat treatment and machining allowance. |
Inconel 718 Bar vs Related Alloy Bars
| Material | When to Consider It | Related Page |
|---|---|---|
| Inconel 718 Bar | High-strength nickel alloy bar for aerospace, turbine, oil & gas and fastener applications. | Inconel 718 product page |
| Inconel X-750 Bar / Wire | Springs, bolts and hot mechanical parts where relaxation resistance matters. | Inconel X-750 |
| Incoloy A286 Bar | Heat-resistant fasteners and lower-cost precipitation-hardened parts. | Incoloy A286 |
| Inconel 625 Bar | Better corrosion resistance where high strength after aging is not the main requirement. | Inconel 625 |
Inconel 718 Bar FAQ
What is Inconel 718 bar used for?
Inconel 718 bar is used for aerospace fasteners, turbine parts, shafts, bolts, oil and gas components, forged parts and high-strength machined components.
What standards are common for Inconel 718 bar?
Common standards include ASTM B637, ASME SB-637 and AMS 5662, AMS 5663 or AMS 5664, depending on material condition and application.
Can J&A Alloy supply cut-to-length Inconel 718 bar?
Yes. J&A Alloy can quote standard length, custom cut-to-length bar, forged bar, billet and machined blank requirements depending on size and quantity.
What information is needed for an RFQ?
Please provide grade, standard, diameter, length, quantity, heat treatment condition, inspection requirement, destination country and any drawing or mechanical property requirement.
Is Inconel 718 bar age hardenable?
Yes. Inconel 718 is a precipitation-hardenable nickel alloy. Mechanical properties depend on solution treatment, aging condition and applicable specification.
Can Inconel 718 bar be used for high-temperature fasteners?
Yes. Inconel 718 bar is widely used for high-strength fasteners and bolts where elevated-temperature strength, fatigue resistance and corrosion resistance are required.
Related Material Links
How to Request an Inconel 718 Bar Quote
Please send the alloy grade, standard, diameter, length, quantity, heat treatment condition, inspection requirement and destination country. If the bar will be machined into a critical part, include the drawing, final dimensions, machining allowance and required mechanical properties.
- Material: Inconel 718 / UNS N07718 / W.Nr. 2.4668
- Standard: ASTM B637, AMS 5662/5663/5664, ASME SB-637 or project specification
- Size: diameter, length, tolerance and quantity
- Condition: solution annealed, aged, forged or custom condition
- Inspection: MTC, PMI, UT, tensile, hardness, third-party inspection